Usage areas of disposable formworks with lightweight filling applications heights ranging from 5 to 300 cm
Lightweight Filling on Floor
Level variations between different usage areas in a building can be eliminated by using ABS Disposable Formworks to construct reinforced raised floors. The structure becomes only as heavy as the concrete in the legs and the topping concrete that covers the disposable formworks. The ABS Disposable Formwork is the lightest application that can be made on any floor of the structure.
Please click for references
Sunken Slab Filling
In commercial buildings in particular, sunken slabs may be required on ground floors or podium areas. By using ABS Disposable Formworks, these areas can be raised to the height specifications of architectural plans. Constructing reinforced concrete raised floors by using ABS Disposable Formworks is one of the lightest and most practical solutions to leveling differences.
Please click for more information
Landscape Filling
ABS Disposable Formworks are preferred not only because they are the lightest filling application. Thanks to the fact that they do not interrupt the drainage slope, they are also the preferred choice for constructing hard surfaces in landscape projects, and they completely eliminate the risk of long-term cracks.
Please click for more information
Inverted Beam Filling
In some cases, due to technical or architectural reasons, drop beams are not the best choice for ceilings. Instead, beams are made on the upper slab as an “inverted beam.” In order to use this type of slab/flooring (in car parks, for example), it is necessary to lightly fill in the space between the beams and cover the area with concrete. ABS Disposable Formworks allow the application of the lightest type of filling.
Please click for more information
Filling Between Foundation Footings
ABS Disposable Formworks can be used very effectively to fill the space between the column/wall footings on top of a raft foundation. As the space to be filled is, ironically, 95% hollow, it can be used for MEP (mechanical, electrical and plumbing) installation passages. The same void space can help prevent flooding as well.
Please click for more information
Car Park Ramp
Car park ramps that are constructed using ABS Disposable Formworks are lighter and more economical than conventional shear wall and beam designs.
Please click for more information
Pool Deck Slab Filling
Constructing a swimming pool on a flat reinforced concrete foundation or a floor slab is much easier and more economical than other designs. Once the sheer walls of the pool are erected, the pool deck can be constructed using ABS Disposable Formworks. Because the inside of the filling is empty, it can be used for MEP (mechanical, electrical, plumbing) installation passages as well.
Please click for more information
Elevator/Staircase Hallway Filling
In office buildings where modular raised floors are used, variations in level between elevator and staircase hallways and the office space are eliminated in the most economical and lightest way by using ABS Disposable Formworks. Because the inside of the filling is empty, it can be used for MEP (mechanical, electrical, plumbing) installation passages.
Please click for more information
Crawl Space Construction
ABS Disposable Formworks can be used to raise the ground floor of a structure above the natural ground level, allowing fast and easy construction of a crawl space.
Please click for more information
Reinforced Concrete Raised Floor
Reinforced concrete floors constructed using ABS Disposable Formworks are 95% empty, so the void space can be used for passing MEP (electrical, mechanical and plumbing) installations in a manner similar to that used for modular raised floors on steel pedestals.
Please click for information
